After Micky McClenaghan finished applying Winterstone to the princess' side and arm I decided that the head was shaped sufficiently to start building up the hair area.  Micky studied the hair that Michael Martchenko drew in the Munsch book, looked at my interpretation on the scale model sculpture then started applying clay to the life size sculpture's head.  Many additional layers will be needed to mimic the puffy hair pictured in the book but we're off to a great start.

His mother, Bernadette applied clay to the arm and legs.  She found that applying Winterstone to the curves of the hands and feet were the most satisfying strokes.  Interesting.  The hands are one of the more interesting areas where people like applying clay.

Sebastian Whitehouse along with his parents Kim and Jamie applied clay to the sculpture.  I enjoy watching family dynamics as they work together mixing powder, tint and water to create clay of proper consistency then sharing the clay while each applying it with their own knives.  When creating art, I get happily engrossed in the process and apparently my volunteers do too.

Ilse Remijn brought her children Carmen, Ismay and Olwrn Reed to help create the sculpture.  They focused on building up the bag's thickness, making the corners sharper and filling hollow areas.  Olwrn Reed was only five years old, making her one of the youngest people to help build the sculpture.  The ages of all participants ranged from five to eighty one.  That's quite a spread!

Kate and Hannah Reilly built up the top of the bag and the shoulders.  Unfortunately Hannah was sick which limited how long she could help but she didn't want to cancel the appointment for fear of missing the opportunity of building the Paper Bag Princess sculpture.  She commented that the sculpture "Looks a bit like a huge cake when you're making it with icing."

Lynda Jessop-Lew brought her children Evan, Meredith and Kaitlyn to help build the sculpture.  Mid way through the session Evan said, "I hate to tell you this but there's a big problem with your sculpture."  I asked him to explain.  He walked over to the picture of the princess in the book and pointed to the crooked prongs on top of her crown then walked over to the scale model sculpture and said that these points were too straight.  Wow, how true.  How observant!  I'll have to make sure that they're more crooked on the life size sculpture.

It reminds me of the numerous times that children come into the studio, look at the picture in the book and compare it to the sculpture then tell me that the left arm should be bent more.  True, it is in the book but I took artistic license to make it straighter and behind the princess for the sculpture.  I think it provides better balance.  They always accept my explanation but sometimes the look in their eyes indicate that they think I'm off side.

This week I had the pleasure of working with volunteers from Guelph Public Library TAG (Teen Advisory Group).  Their care and artistic talent was truly impressive.  Susan Fayez added Winterstone clay to improve the shape of the head, arm and calf while Zoe Nield improved the shape of the head, arm and leg.

With TAG people I got to explain the sculpture's needs at a more fundamental level.  Rather than saying, "Make the arm thicker," I said, "Add lots of clay to the top of her upper arm to build up her biceps, then a little less under it because triceps are smaller.  For the lower arm make it larger and round near the elbow but thinner and flatter near the wrist."  They caught on instantly, giving the sculpture more humanly proportions.

The second half of TAG volunteers was a larger group but we managed to not interfere with each other in tight quarters.  Natasha H helped layer clay on the arms and legs.  Liz Legere worked on the legs and arms and found that, "It was fun playing with the mushy cement."  Liz Brooks shaped the bag, legs, arms and neck.  Nicola Tourangeau helped with the head and neck and commented that her favourite quote from the book was, "Ronald, you are a bum."  Inessa Townsend-Fish helped with the arms, legs and bag.  Elissa Davidson, the group leader helped with the arms, bag corners and elbow.

TAG people were the first to add a nylon mesh layer with the Winterstone clay layer.  It proved challenging, getting the mesh stay in place while bending around corners such as the elbows but we found success by slicing the mesh at strategic locations and drying the clay to the perfect consistency (wet enough to mold but dry enough to hold its shape).  Elissa claimed that, "The elbow began as our nemesis, but I think it worked out."  Yes Elissa, I can confirm that that elbow looked great the following day once the Winterstone clay had dried more.

TAG sculptors instinctively knew to look at the sculpture from different angles to evaluate proportions and make corrections where needed.  At the end of the session one of them stood back, looked at the sculpture and compared it to the Michael Martchenko picture in the book then said that the sculpture's knees were too low.  I looked at them, thought a moment then agreed.  "Thanks," I replied.  "We can shift the knees upward with subsequent clay layers."

Today's helper had symbolic significance.  Sofia Ciaravella was the daughter of Elizabeth, the girl who the Paper Bag Princess was named after.  Wow!  Now we have two generations of key participants, Elizabeth for the book princess and Sofia for the sculpture princess.

With only one helper today, I had time to mix and apply many batches of WInterstone clay.  Sofia's grandmother, Susan Moziar was kind enough to snap a photo of Sofia and me working together.  We shaped the head, arms and legs, focusing on building up the thighs.

This was three groups combined.  I recognized Mary Mindorff Murphy's face the second she walked through the door as someone who used to work at Blount with me (although I hadn't recognized her name from emails setting up the time slot).  As a bonus, she gave me two old books about sculpting that weren't any use to her... but very interesting to me.  Mary applied Winterstone clay to the upper arms and cheeks of the princess.

The second part of the group was Brandon Fahey and his father Brad.  They adapted well to sculpting, treating it with care like icing a cake.  They worked on the princess' left hand, the back of the bag and the bottom of the bag.  Since we couldn't tip the sculpture on its side to work on the bottom, Brandon and Brad had to fight gravity, pushing the clay up under the bag.  By sticking clay along the edge they managed to extend the bag downward, creating the impression that the bag sides were thin walls like paper.  Brandon liked the way clay felt as it dried on his fingers and tried numerous times to convince his father to let him not was up.  Brad held firm, managing to protect his car and house from a trail of Winterstone hand prints.

The third part of the group was Jessica and Kate Nixon.  They enjoyed rubbing Winterstone to the princess' legs, arms and bag.  They loved the feel of Winterstone and had the messiest hands of any helpers to date.

Mothers Laura Goulden and Dee Nixen were in the room but decided to stand back, watch, take pictures and chat with the sculptors rather than getting their hands dirty.  

While helping build the sculpture my helpers and I chat about whatever comes to mind.  One common question is "Why did I choose Robert Munsch?"  I became a fan of his books while reading them to my children many years ago.  I loved reading lines like "Hey mud puddle!" and "You look like a real prince but you are a bum."  In addition, Michael Martchenko had created illustrations that were engaging and fun to look.  I'd read a page then pause, spending a few moments studying at the picture and finding interesting, subtle details.

Another common question is, "Why the Paper Bag Princess?"  The primary reason is because I like the story line and messages within.  I like dragons, princes and princesses, I like the flipped roles where the princess has to save the prince, I enjoy the clever way the princess beat the dragon by tricking him into tiring himself out by flying around the world and I'm impressed by princess' rejection of the materialistic prince.

Something I explain to everyone when they arrive is why I chose this particular picture from the book as a basis for the sculpture.  Michael Martchenko created brilliant visuals for the entire book but some are more sculpture suitable than others.  I welcome blog readers to grab a copy of the book and look through it with me.  In the first illustration the princess is wearing a gown but the sculpture needs to be wearing a paper bag.  In the second illustration she's wearing nothing except a cloud of smoke.  In the third she's wearing a paper bag but looks angry.  In the fourth the dragon head is sticking our the door of its den.  As a sculpture, this risks looking like a decapitated dragon.  Not good.  For the next three illustrations the dragon steals the show so that anyone seeing a sculpture would instantly see the dragon, making the princess appear irrelevant.  The next illustration is perfect!  The princess is waving goodbye to the dragon as he flies around the world.  What a wonderful pose for a library entrance.  She'll be waving hello and goodbye to people as they arrive and leave.  She'll be waving hello and goodbye to people as they read stories travelling through the adventures within.  None of the following illustrations of the Paper Bag Princess fit the library sculpture so well.

The second week of people helping build the sculpture started with the group of Bonnie Hale along with her children Maeve and Sam Konyer.  Joining them was Cindi Conlon who happened to be a neighbour from our old neighbourhood.  That provided a surprise bonus for the project, getting to catch up with a friend from the past.

This group completed the application of the first layer of Winterstone to the head and neck then began shaping the sculpture by applying the second layer of Winterstone clay to the thighs and paper bag.

A side note: All four of these participants were left handed causing me to be "left out" as the only right handed sculptor.

One day when my wife's parents Shirley and John Burrows were over for a visit I mentioned that the public were invited to help build the Paper Bag Princess sculpture.  They sheepishly asked if family was allowed to participate.   "Of course", I replied.  Later that day when I logged onto email, there was a request from them. How sweet!

Another person expressing interest was Andrew Skelton, a friend of Justin Wolting, my son-in-law.  He saw my sculptures during events surrounding Justin and Sondra's wedding and jumped at the chance to participate creating one.

With a group consisting of all adults, I took the opportunity to lie the sculpture on her side to provide easy access to the bottom of the bag.  It's much easier to apply Winterstone clay when you aren't fighting gravity.  Once the bottom was complete we stood the princess back up applied clay to give her heftier thighs and a thicker right arm.

More helping relatives stepped up to try their hands at sculpting WInterstone.  My aunt Donna Kramp brought her granddaughter Maleline Zammit who loves craft building to apply a clay layer.  

Apparently another life skill helps develop sculpting skill.  Madeline said, "It's like putting peanut butter on toast."

This team of two focused on applying a layer of WInterstone to cover up the wire mesh pattern showing through the paper bag part of the sculpture.